The world’s best
foam roller bottle sleeve.
A diameter-specific TPU sleeve turns the bottle you already carry into a foam roller. Ten sizes. One exact fit. Zero compromise.
Foamed TPU
Sizes
Grip Pattern
pressure becomes flow
A sleeve shouldn't be a sock. It should be the last millimeter of the bottle itself — measured, molded, and matched to the exact curve it lives on. That's the whole idea. That's H2Roll.
carry it. roll it.
One bottle, two jobs. It rides to the gym on its strap, then goes straight to the floor — calves, quads, glutes, wherever the session left you. When you're done, it's still just your water.
- Slide it on. Each sleeve is cut for one bottle diameter, so it holds without slack.
- Carry it. Sleeve and strap travel as one.
- Roll. Ten longitudinal ribs give the floor something to grip.
be like
water.
water takes the shape
of whatever holds it.
Ten sizes.
zero compromise.
For the Stanley Transit Mug 16oz — the narrowest we cut, one millimeter under the Drifter, and that millimeter is the whole difference.
91mm outer · 225mm tallChoose Ranger · $44.99Cut for Hydro Flask's 18, 20 and 24oz and CamelBak's 24oz squeeze bottle. One sleeve answers them all.
93mm outer · 225mm tallChoose Drifter · $44.99The Yeti Rambler 18oz and Stanley's Quick Flip Go 24oz — the last of the narrow bodies before the range steps wide.
97mm outer · 225mm tallChoose Nomad · $44.99Cut for the plastic CamelBak Eddy 750ml, and 25mm shorter than the rest, so the rim and strap eyelets sit below the lid. Not for the insulated steel one, which runs wider.
101mm outer · 200mm tallChoose Rover · $44.99The everyday carry. Cut for the Owala FreeSip 24oz and the straight-wall bottles that share its waist.
105mm outer · 225mm tallChoose Scout · $44.99The Rambler family at 26, 36, and 40oz, the Owala FreeSip 32oz and Stanley's IceFlow 2.0. Where the lineup opens up.
111mm outer · 225mm tallChoose Summit · $52.99The plastic CamelBak Eddy 1L. Cut short like the Rover, so the rim and eyelets stay below the lid.
116mm outer · 200mm tallChoose Atlas · $52.99The original Stanley IceFlow, cut to its wide upper body. The 2.0 runs narrower and takes the Summit.
113mm outer · 225mm tallChoose Titan · $52.99Hydro Flask builds its 32oz and 40oz on one wide body. One sleeve takes both.
116mm outer · 225mm tallChoose Maverick · $52.99The widest we cut, for the Owala FreeSip 40oz, sized to Owala's own 3.6-inch figure.
120mm outer · 225mm tallChoose Pioneer · $52.99from the workshop,
to your bottle.
Rid yourself
of the superfluous.
TPU Construction
Foamed TPU at Shore 65A–82A. Soft enough to grip, firm enough to hold its geometry through years of drops, rolls, and refills.
Diameter Precision
Each sleeve is cut to one diameter. No stretching, no slipping, no universal-fit guessing — the sleeve and the bottle become one object.
10-Rib Grip Pattern
Longitudinal ribs with a foam-roller profile. They stop the roll on any surface, quiet the clank, and give your hand somewhere to land.
Thermal Buffer
A continuous TPU layer between bottle and world. Condensation stays off your desk; hot and cold stay where you put them.
find your fit
Bottle not listed? , or ask us about it.
Wrap a tape around the widest part of the body and divide by 3.14 — that's your diameter. Round up to the nearest size above. Every sleeve stands 225mm (8.86″) tall, except the Rover and Atlas, cut to 200mm (7.87″) to sit below the CamelBak Eddy's lid.
before you roll.
Which size do I need?
The one cut for your bottle. Pick your bottle in the finder and it names the sleeve. Every name stands for exactly one inner diameter, and that millimetre figure is what decides the fit.
My bottle isn't listed.
Measure it. Wrap a soft tape around the widest part of the body and give the finder that number. It does the dividing by 3.14 and names the sleeve that holds it, or tells you plainly that none of the ten is close enough.
Will it still fit my cup holder?
The sleeve adds 19–29mm to your bottle's diameter. Each size lists its outer diameter, so measure across your cup holder and compare.
What is it made of?
Foamed TPU at Shore 65A–82A: soft enough to grip, firm enough to hold its shape. Ten longitudinal ribs give the floor something to grip.
Where is it made?
Each sleeve is printed to order in Iowa and ships from the workshop it was made in.
How do returns work?
Ordered here? 30-day money-back guarantee: if it isn't right, tell us within 30 days of delivery for a full refund. Reply to your order email to start one. Amazon orders go back from Your Orders and are covered by the Amazon A-to-z Guarantee. eBay orders are covered by eBay's Money Back Guarantee.
Is the guide really free?
Yes. Leave your email and the roll & band guide is yours: a ten-minute rolling sequence and a twenty-minute band circuit. The h2roll letter follows a few times a month, and one tap unsubscribes.
roll it out, on us
A free guide: a ten-minute foam-rolling sequence and a twenty-minute resistance-band circuit, built around the bottle you already carry. Leave your email and it's yours — along with a quiet letter now and then, and word when a new size lands.
Share it. Earn 10% on every sale you send.
Post H2ROLL on Instagram, TikTok or YouTube and earn 10% of what your followers spend on sleeves, on Amazon and in our shop.
Apply
Tell us where you post. We read every application and reply by email.
Get your own link
Once you're in, you get your own Amazon link and a code of your own for our shop. Amazon credits you for purchases up to 14 days after someone taps your link.
Get paid monthly
Each month we send you your sales count and pay what you earned, by PayPal or bank transfer.
Paid posts need a clear disclosure, such as #ad. The FTC requires it, and so do we. US promoters send a W-9 before the first payout.